Add a licence to a fixed point to multipoint bi-directional licence

Overview

This process tells approved radio engineers and certifiers how to add a licence to a fixed point-to-multipoint bi-directional licence.

Follow the steps below to complete the process.
 

Step by step guide

Step 1

Logon to SMART using your username and password.

Step 2

Create a licence application to modify the primary licence channel of the Fixed Point-to-multipoint Bi-directional system.

Note

You can only select the primary licence record to modify.

Step 3

Complete the necessary create a licence application steps then go to Step 4 below.

Step 4

Select Copy Licence to copy the existing licence into the modify licence application.

Step 5

Click the Add Receive Location button on the primary licence.

Step 6

Enter the Receive Configuration Details for the new receive location then click Continue.

Note

You can add additional Receive Locations by repeating Steps 5 to 6 above.

Step 7

Click Validate Data to create the new associated licence(s).

Step 8

Click on the hyperlink of the new associated licence.

Note

A new associated licence will not have a Licence No. and the Retain checkbox will not be ticked

Step 9

Update the default Spectrum, Transmit Location, and Receive Location details on the associated licence.

Step 10

Click Back to return to the Primary licence.

Note

Repeat Steps 8 to 10 to update associated licence details if more than one licence has been added to the licence

Step 11

Click the Retain checkbox of the new and updated associated licence/s then click Continue.

Step 12

Certify the licence(s) by following the Enter Decision procedure.

Step 13

Confirm licence by following the Confirm licence procedure.