Document Actions
Electromagnetic compatibility flowchart
|
Does the product contain a radio transmitter? |
yes no |
| Go to the Radio Compliance Flowchart |
|
Is the product imported from Australia? |
yes no |
|
Does the product comply with Australian ACMA requirements? |
yes no |
|
Check the list of EMC standards accepted in New Zealand. Is there an applicable EMC Standard listed? |
yes no |
| The product may be outside the EMC requirements. Check with a testing laboratory or RSM. |
|
Does the product comply with an applicable Standard? |
yes no |
| The product may NOT be used or supplied in New Zealand |
|
Power consumption < 6nW, or Spare Part, or Motor Vehicle, or NZ Defence Force |
yes no |
|
Check definition of Group 2 industrial, scientific and medical. Is the product classified as Group 2 industrial, scientific and medical? |
yes no |
| Must comply with Table 6, ISM frequencies. Establish a compliance folder with a declaration of conformity, a product description and a test report from an accredited test body. Label with supplier Identification. Label with compliance Mark. Product may then be supplied in New Zealand |
|
Check the manufacture's specifications of the product. Does it contain any parts listed in 7(a) of the EMC Standards Notice? |
yes no |
| Further documentation not required. Product may be supplied in New Zealand. (Optional:- Establish a compliance Folder with a declaration of conformity and a product description. Label with supplier Identification. Label with compliance Mark.) |
|
Is it telecommunications terminal equipment for installation in customer premises? |
yes no |
|
Check definition of Group 1 industrial, scientific and medical. Is the product classified as Group 1 industrial, scientific and medical? |
yes no |
| Must comply with Table 6, ISM frequencies. Establish a compliance Folder with a declaration of conformity, a product description, and a test report, or manufacturers performance specifications, or a certificate issued by another administration. Label with supplier Identification. Label with compliance Mark. Product may then be supplied in New Zealand. |
|
< 10 per year, or battery powered, or prototype for demo, or fixed installation? |
yes no |
|
Establish a compliance Folder with a declaration of conformity, a product description, and a test report, or manufacturers performance specifications, or a certificate issued by another administration. Label with supplier Identification. Label with compliance Mark. Product may then be supplied in New Zealand. |
| Product may be supplied in New Zealand |
